Browse by Tags
All Tags »
MPLS (RSS)
When buying or upgrading a Juniper device, there are always questions that come to mind ( Is “this” feature supported on “that” platform, and if so “which” version did it come out? ) As of July 1st, Juniper have released the Pathfinder tool: http://pathfinder.juniper.net
Read More...
Here I have some information on MTU Juniper, I had investigated it for a customer while ago. The actual frames transmitted also contain cyclic redundancy check (CRC) bits, which are not part of the media MTU. For example, the media MTU for a Gigabit Ethernet
Read More...
JUNOS now support MPLS-in-GRE & MPLS-in-IP. You guys can now encapsulate the MPLS label stack for a packet with an IP header, making it possible to tunnel MPLS over networks that do not have MPLS enabled on their core routers. The JUNOS software supports
Read More...
TThere are numerous misconception about VPLS support on Juniper Fast Ethernet PICs. Here is a little quick workaround running VPLS on Juniper's "PE-4FE-TX and PB-4FE-TX" PICs. This setup requires MPLS LSPs between PEs... Interface Configuration: jahil@jahil-re0
Read More...
RouterBoard makes a complete line of devices that pound-for-pound beat Cisco/Juniper/Nortel/Extreme on features at a much lower price-point. I've been using Cisco/Juniper/Nortel devices for years now and after some seriously productivity killing bugs
Read More...
In most design scenarios, you’d like to advertise the BGP default route to EBGP neighbors without having a BGP default route in your own BGP table. For example, an ISP might decide to advertise only the BGP default route and local BGP networks to customers
Read More...
Rate limit or shaping is always confusing; as to which one to use. The goal of traffic shaping is hard-limiting of sending rate, while the purpose of rate-limiting is usually admission control based on burst sizes. Traffic shaping hard-forces “fixed”
Read More...